Quality Laminate Countertops

Mal-O-Sen Co., Inc.

Durable Elegance

Image of 5 company logos: Formica, Greenlam, Nevamar, Pionite and WilsonArt brand plastic laminate

Countertop Specifications

Mal-O-Sen is a manufacturer, fabricator and distributor of quality laminate countertops. Our plant is located in Hastings, MN just 20 miles south of St Paul. Mal-O-Sen has been in business for over 47 years, 1970 - 2017. Mal-O-Sen uses laminate from five (5) of the most well know laminate manufacturers; Formica, GreenLam, Nevamar, Pionite and WilsonArt.

Mal-O-Sen offers a wide selection of laminate countertop edge styles to fit any decor, sixteen (16) in total counting six (6) edge styles we distribute for other manufactures.

Standard Mal-O-Sen countertop lengths are 8', 10' and 12' long. Standard countertop depths are vanity 22-1/2", kitchen 25-1/2", island 27" and 36". The maximum postformed island width is 52". Standard back splash height is 3". Other island widths, kitchen widths and back splash heights may be special ordered.

Mal-O-Sen manufactures ten (10) different laminate countertop edge styles. They are; Postformed, Single Cove, D-Edge, 180° Wrap, Laminate Bevel, Wood Rainbow, Wood Classic, Wood Classic Accent, Wood Double Classic Accent and Wood Elite.

Photos and drawings of the Mal-O-Sen edge styles are shown on the 'Mal-O-Sen Specs' page. Open the drawing link for detailed measurements.

Mal-O-Sen is also the local distributor for VT Industries fine laminate countertops, located in Sac City, IA. Mal-O-Sen offers six (6) VT edge styles. They are; Barcelona, Geneva, Marbella, Ora, Tiburon and Valencia.

Vt laminate countertops are available in 8', 10' and 12' lengths.

VT kitchen edge styles vary in width and backsplash height depending on edge style. For dimensions of each style, open the drawing link under each photo.

Special widths or backsplash heights can be special ordered.

Photos and CAD drawings of the VT edge styles are shown on the 'VT Specs' page.

Diagonal Corners

Mal-O-Sen can cut diagonal corners on fabricated countertops in any of three (3) different styles or options.

Click on image to enlarge.

Drawing showing diagonal corner with a corner shelf and coved back splash. Option 1

Drawing showing diagonal corner with full depth center section and screw-on back splash. Option 2

Drawing showing diagonal corner with a center mitered section and coved back splash. Option 3